More Details
*200 Lumens,28 super bright SMD LEDs, 1.5W, 30,000 hours lifespan. 3 lighting modes: 3000K warm white light, 4300K natural white light and 8000K cool white light.
*Material:Plastic shape+Metal goose neck.
*The picture light is powered by 3.7V 2*2200mAh high capacity Li-ion battery, 5-6 hours full charging time. The led indicator will auto off once the batteries are fully charged.
*The remote control will operate lights within 20 feet.Up to 10 lights can be controlled by one remote control.
*2 control ways: Remote control and Manual operation using ON/OFF switch.You can also change the brightness level of each color by using ON/OFF switch.
Installation
Detachable Clip Mount Bracket (included)
1. Attach Detachable Clip Mount Bracket to light by turning the clip bracket clockwise until it is tight. Hand tighten only.
2. Open clips, to attach Detachable Clip Mount Bracket to picture frame. For frames 1/2" to 1-1/4" thick.
3. Adjust neck and tilt head to desired position.
Detachable Screw Mount Bracket (included)
1. Remove Detachable Clip Mount Bracket from flexible neck by rotating the Clip Mount Bracket counter-clockwise until loose.
2. Place screw end of flexible neck into screw mount bracket. Hand tighten only. Do not over tighten.
3. Place screw mount bracket over top of the frame with the screw holes facing the back of frame.
4.Drill a pilot hole for each screw.Insert up to three (3) screws (included) through the holes in the screw mount bracket to secure properly.
5. Adjust neck and tilt head to desired position.
Replacement remote control battery:
Unscrew the screw on the back of remote, and then pull out the battery box to change the remote battery.
Packing List
- 1 x Picture Light
- 1 x Remote Control ( included CR2025 button cell battery)
- 1 x Micro-USB Charging Cable
- 3 x Screw
- 1 x User Manual
View full description
Item# : SPM9269385029
Model # : H600-1B
