Incorporates advanced Non-touch pilot arc cutting technology, with an excellent Arc stability. Very easily cutting surface is rough, the serious rust, with oil and spray paint of metal materials, and better cutting quality, finish the work faster. Can cut up to 3/5 in. stainless steel, alloy steel, low carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes. 95~260V wide voltage, 50-60Hz, almost all of the voltage and frequency can be used, and is designed for both demanding industrial work, construction. It requires less work to produce an overall better result with a cleaner cut. Quick setup: NPT 1/4" industry type D coupler can connect easily with the pre-installed plug on the air compressor. The filter is located inside the machine with an automatic air control solenoid valve. Automatic compensation for voltage fluctuation, over-voltage protection, under-voltage protection, over-current protection, over-load protection, automatic temperature control, and fan dormancy.
View full description
Item# : SPM12482976416
Model # : CUT-50HF
Dimensions and Capacity:
Torch Cable Length :
13.0 (Ft.)
Work Cable Length :
13.0 (Ft.)
Power:
Input Power :
AC 95~260V/50~60Hz (Volts/Phase/Hertz)
Rated Output :
60% Duty Cycle @ 50 Amp (Amps/Volts/Duty Cycle)
Warranties & Coverage:
General Warranty:
One Year
Installation:
Assembly Required:
Fully Assembled
Certifications:
Certifications:
ETL Listed