Immersion Water Heater
Immersion Heater let your water heat up in just a few minutes. All you have to do is put the heater in the water and connect it to a 110V or 120V power supply.
Equipped with a Fahrenheit water temperature gauge, let the water temperature reach the temperature you want to end the work of the heater at any time.
The thermostat control of pool heater will turn on or off circularly and automatically to maintain the water temperature when water temperature reaches around160 degrees Fahrenheit.
1 x pack bucket heater
1 x Digital LCD Thermometer
1 x User Manual
Portable water heater
Thermostatic control, the immersion water heater will automatically power off when heated to about 160 degrees Fahrenheit.
Do not plug two Immersion water heaters into the same socket to avoid unnecessary problems!
1500W Immersion water heater is suitable for small inflatable swimming pools, bathtubs, buckets, etc. in summer, (not suitable for heating large swimming pools)and for bathing, camping and travel in winter.
About Our Immersion Electric Heater:
Safety and fast, in line with electrical safety standards.
High-power rapid heating, saving your precious time.
urable, high-quality stainless steel protective device to prevent hot hands.
It has a wide range of applications and is suitable for a variety of scenarios.W
aterproof power cord, very suitable for home and outdoor use.
Please check the water level before use, it must be completely immersed, please make sure that the water level is sufficient.
When inserting the electric water heater, do not reach into the liquid.
The plug must be disconnected to use water to prevent accidental injury.
Do not plug two heaters into the same socket.
Please read the instructions carefully before using the immersion water heater.
Please do not use it continuously for more than 3 hours!
View full description
Item# : SPM9278059129
Model # : WH-200