The soda maker refill adapter can be used to refill small CO2 tanks from larger CO2 tank.
If the vial thimble is very thick and short and cannot be inflated, the hose will expand, please replace the thin thimble bottle.
The atmospheric cylinder should have sufficient pressure, If there is no siphon or liquid CO2 in the atmosphere bottle, need to invert the CO2 atmospheric tank for inflation.
Hose Material: Stainless steel
Hose Length: 36 Inch
Working Pressure: 3000 PSI
Thread for Large CO2 Tank: CGA320 G1/2-14
Fits Soda Stream Tank Thread: TR21-4
1 x Refill Adapter with Hose
1 x Gauge
1 x Fittings Set
1 x User Manual
Confirm the inlet valve and release valve are closed, rotating the pin switch of small cylinder adapter to the top.
Connect the fill station connector to the big CO2 bottle.
Connect the small cylinder to the soda CO2 adapter.
Rotate the pin switch of the adapter to the bottom to completely open the cylinder valve.
Open the big Co2 air tankâ€™s valve.
Slowly open the handwheel of the big tank listening for a small hiss. When hissing stops, open a little more until it's all the way open. Wait until you hear no gas flows, filling can be complete.
Once refilling is complete, stop the CO2 by turning the handwheel.
Isolate for the soda maker cylinder by rotating the pin switch to the top.
Release the residual gas by opening the vent valve.
Remove the small cylinder.
View full description
Item# : SPM9167417123
Model # : iSH09-M643829mn