Taramp\'s taramps ds 800x4 2 ohms 800 watts rms multichannel amplifier car audio 4 channels bridgedable class d aluminium high power fu

INPUT: Inputs of signals to be amplified. Connect these signals to RCA outputs of Head Unit, using good quality shielded cables to avoid noise interference | LEVEL: It sets the amplifier input sensitivity, which allows an optimal adjustment to the output signals levels of nearly all models of Head Units found in the market. | WIRE HIGH LEVEL INPUT: Input for high level / low impedance signals (from the speaker output of the players or multimedia center). | POWER (Power Supply Connector):The connector terminal (+) must be connected to the battery's positive pole with a 10mm (minimum) wire gauge. The connector terminal (-) must be properly connect to the battery's negative pole with a same wire gauge. The remote terminal must be connected to the Head Unit REMOTE output with a 0.75mm wire. | Short-circuit Protection: Shutdown the amplifier when detect a short- circuit or impedance lower than the supported at the output.

View full description