Combination Smoke Alarm and Carbon Monoxide Alarm Can Detect the threat of these Two Gases: Smoke and Carbon Monoxide. KEEP YOU FAMILY SAFE THEN EVER
Photoelectric Sensor Detects Smoke, Smoke Detect While Minimizing the false alarms.
Carbon Monoxide Detector alarm Using High accurate Electrochemical Sensor, alerts you to Carbon Monoxide Danger. insurance Safety of your life.
Suitable for all the Place Possible to Produce Cambo Smoke and Carbon Monoxide, Such as your Home, Kitchen, Bedroom, Bathroom, Hotel, Cars... Also Useful When you are Enjoying the Barbecue, Using Charcoal Warm yourself, or Putting it in your Parking Garage, etc.
Test the alarm First, HOW TO TEST IT(3 steps):
Step 1: Install the batteries in clean air , then press the test button for five seconds to test the units electronics, beeps will sound if it's normal;
Step 2: Leave it in clean air for one minute;
Step 3: Then put it into a sealed bag, spray some smoke or CO gas into the bag and seal it. Waiting for about one minute, the Alarm will go off if it's normal.
[NOTE: DO NOT test it by directly burning something under this alarm, which is an invalid test. Because there is no or few smoke and co created under complete combustion. so the alarm don't beeps duo to it did not detect enough smoke or co gas. when the fire is smoldering fire or when the fire is going out, it is in incomplete combustion state, so it releases a lot of smoke gas, it is visible to the naked eye.]
HOW TO SILENCE THE ALARM
SMOKE ALARM BEEPS: When smoke alarm beeps you can press the test/rest button to enter it into mute state(NOTE: If you want to exit the mute state, you need to press the button again-[Manually exit]; or it will auto-exit the mute state after waiting for about 6 munites or when the alarm detected clean air-[Auto-exit])
CO ALARM BEEPS：Only when detected clear air can it silence the alarm(if the room still exists high level of CO the alarm will keep alarming until the air was cleaned)
W
View full description
Item# : SPM9285196829
Model # : GS528A
