Compatibility:
This 6 FINS Nutri Ninja Extractor Blades Assembly ONLY Works with these models:
(1) Nutri Ninja 900W BL450-70, BL451-70, BL454-70, BL455-70
(2) 1000W BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70,BL484-70，BL480, BL480D , BL480-30
(3) Fit 16oz cups
Please check before place order
Female Bottom
Please confirm and compare with your original Blade
Your Blender must have Mail fins
Count the FINS IT SHOULD BE 6-FINS
3.94" (10cm) Diameter bottom
Important Note
Please check whether the gear of the bottom loosen or tighten before use. If it's loosen, please tighten it
Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）
Replace the Gasket if the blender begin leakage
Do not run your blender over 4 minutes at a time to prevent overheating of the blender
Place the replacement blade onto the cup and screw it tightly until you have a good seal
Please make sure the blade in right place and locked tightly
You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
Package Include:
1x 6Fins Bottom Blade Assembly,
2 x Replacement Gasket Rubber (One Gasket Rubber already in the blade )
6 Fins Blade For Ninja 7 FINS Blade For Ninja 24 oz Cups 6 FINS
Bottom Diameter 3.94" (10cm) 3.94" (10cm) 3.94" (10cm) 3.35"
Fins 6 Fins 7 FINS 6 Fins
Bottom style Female Male Male
Compatibility BL480 BL480D 900W BL450-70, BL451-70, BL454-70, BL455-70, BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70,BL484-70, BL450-30/BL456-30/BL451-30/BL454-30 Nutri Ninja Auto-iQ BL480-30/BL480D-30/BL481-30/BL482-30/BL490-30/BL681A-30/BL682-30/BL642W/BL682/BL687 Auto-iQ Pro BL487-30/BL488W-30/BL487A-30/
View full description
Item# : SPM9270332829
Model # : iSH09-M604474mn
