Small Kitchen Appliances
Washers & Dryers
Vacuums & Floor Care
Baby & Toddler Clothing
Computers & Tablets
Cameras & Camcorders
Bath & Body
Health & Wellness
Storage & Organization
Grills & Cooking
Baby & Toddler Shoes
Camping & Hiking
Pools & Accessories
Chrome socket base heat treated for durability and serviceability. Patented bit holding principle features internal dimple which forces bit surface to the opposite side for maximum retention. S2 and alloy steel bits.
Socket is full polish nickel chrome plated. Large hard stamp identification. Turn down at base provides grip surface to pull sockets off ratchets. Entry angle guides fastener
Ball end allows you to work on hex fasteners from difficult angles. Chrome socket base heat treated for durability and serviceability. Patented bit holding principle features internal dimple which forces bit surface to the opposite side for maximum retention. S2 and alloy steel bits.
Features and Benefits Made of high quality steel (chrome-molybdenum) One piece design Engineered specifically for use with impact tools, using the most up to date industrial specifications Made to transfer the pressure from the thinnest part of the socket wall toward the thicker section, resulting in increased strength Lifetime WarrantyThis set contains both fractional and metric sizes with ...
Use this hex bit socket to move hex fasteners along quickly. Nickel-chrome finish provides a lifetime of corrosion resistance.
Craftsman 4mm Hex Bit Socket Puts Torque at Your FingertipsThe 4mm hex bit socket is a specially designed bit that will make it much easier for you to handle those frustrating six-sided fasteners. The hex bit socket is made to fit on a screwdriver to aid in fastening and removing six-sided fasteners.The Craftsman 4mm hex bit socket is silver and ...
For use with GearWrench Pass-Thru Ratchet and Socket System. Socket is broached for use with conventional square drive ratchets.
The Craftsman 4mm Easy-to-Read Socket, 6-pt. Metric, ��-in. drive Designed with a Headlock grip, the Craftsman 4mm Easy-to-Read Socket, 6-point Metric, ��-in. drive provides extra contact on the flats of the fastener for extra turning force. The small size delivers optimal precision and accuracy when working with the delicate hardware. Laser-etched size markings that make it easy to locate in ...
Comes with EYE-D socket marking. These laser-etched markings optimize the size identification as well as provide SAE/Metric differentiation, even in low light conditions.
Pass Thru Sockets are made for use with the GearWrench Pass Thru Ratchet. They eliminate the need for deep sockets. Sockets are also broached for use with conventional square drive ratchets.
Manufactured to industrial specifications assuring a thin wall design with precise nut end dimensions. Radius corner design engages the flats of the fastner, not the corners, providing 15% to 20% more torque. Also prevents rounding of fasteners and enhances the turning of worn, rounded fasteners. EYE-D laser etched markings optimise the size identification as well as provide SAE/Metric ...
Turn it with this 1/4-IN DRIVE 4MM Universal Max Axess Tool With a unique pass through design that makes short work of flat and peaked fasteners alike, this 4MM universal Max Axess socket eliminates the hassle of swapping between standard and deep well sockets, while machined with the universal design it turns 4, 6, 12 point, spline, external Torx and ...
EYE-D laser etched markings optimise the size identification as well as provide SAE/Metric differentiation, even in low light conditions.
Hex Driver Socket has an exposed bit length of 1 inch.
Includes the following bit sockets: 4MM, 5MM and 6MM Slotted; #1, #2, and #3 Phillips; #2 Pozidriv��. Chrome socket base heat treated for durability and serviceability. Patented bit holding principle features internal dimple which forces bit surface to the opposite side for maximum retention. S2 and alloy steel bits. Includes slide rail.
Metric standard 6-point socket in 1/4-Inch drive. 1/4-Inch drive sockets are designed for light duty and easy access. Have a small space with a small fastener, this is the socket to use.Craftsman sockets are deisgned with chamfered edges to allow for easy placement on fasteners. Nickel chrome plating and made from alloyed steel these sockets are backed by the Craftsman ...
OTC 6170 7 pc Metric Hex Bit SQ. Drive Socket Set 6171 ��� 3 mm ��� 3/8" 6172 ��� 4 mm ��� 3/8" 6173 ��� 5 mm ��� 3/8" 6174 ��� 6 mm ��� 3/8" 6175 ��� 7 mm ��� 3/8" 6176 ��� 8 mm ��� 3/8" 6177 ��� 10 mm ��� 3/8" A 5% restocking fee will be applied ...
Features and Benefits: Forged from the finest chrome molybdenum alloy steel ��� the best choice for strength and durability Radius corner design - to extend the life of fasteners Included in a heavy-duty blow molded case Fully guaranteedNo doubt, Sunex tools offer one of the most complete and toughest Impact Socket lines around. This metric 3/8" drive, impact socket set ...
Features and Benefits: Made of chrome vanadium Packaged in a metal boxIncludes 9 short sockets from 4mm to 11mm, 7 deep sockets from 5.5mm to 11mm, push button ratchet, universal joint, 2" and 4" extensions and spinner.
Features and Benefits: Socket set features sockets that integrate directly into the ratchet head Vortex sockets integrate into the GearRatchet�� handle instead of attaching to a square drive eliminates the need for most deep well sockets Includes adapter that will fit standard sockets 5 degree ratcheting arc vs. 12" on standard conventional ratchets Up to 50% thinner than conventional ...
120 positions give a 3�� ratcheting arc Low profile head provides access in tight confines. Exceeds ASME torque performance requirements Flush-mounted lever for On/Off switch. The 51pc GearWrench 120XP��� 1/4" SAE and Metric Drive Set takes access to the next level, making it easier and quicker to complete jobs. The Double-Stacked Pawl design delivers 120 Positions, exceeds ASME torque ...
12 piece 1/4" ratchet and socket set contains: 10 metric sockets - 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm ; 100mm extension bar; 72 teeth geared ratchet for 1/4". ���12 piece ratchet & socket set 1/4" metric ���72 teeth gear ���Delivers high torque ���Soft grip ergonomic Ford handle for gripping power ���Extension bar helps with hard-to-reach areas ...
Features and Benefits: Sockets have 1/4" drive and are 12 point All Duo-Socket��� sockets are marked by both roll stamp and large laser etching on the opposite side The ratchet included is a 72 tooth quick release Wobble extension provide 15 degree of deflection and can also be locked straight for normal use Packaged in blow molded caseThe thin wall ...
Set includes EYE-D laser etched markings on sizes 4 mm, 5 mm, 5. 5 mm, 6 mm, 7mm, 8mm, 9mm, 10 mm, 11 mm, 12 mm, 13 mm and 14mm. Also included is a Socket Bar (16-831) and 20 Socket Clips.
28 piece 1/4" ratchet and socket set contains: 13 metric sockets - 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm; 13 CR-V bit sockets - T10, T15, T20, T25, T30, PH1, PH2, SL5.5mm, SL7mm, H3mm, H4mm, H5mm, H6mm; 100mm extension bar; 72 teeth geared ratchet for 1/4". ���28 piece ratchet & socket set 1/4" metric ...
Not a member?
Discover the value of being a cardmember.
Get our Kmart mobile app